standardDIN 933
statusHistorical
P · mm3.5
aMax10.5
More dimensions
cMin0.2
cMax0.8
daMax33.4
bearingDiameterMin42.7
e · mm50.85
k · mm18.7
kMin18.28
headHeightMax19.12
kPrimeMin12.8
rMin1
s · mm46
sMin45
Execution standard reference
M30 x 160 Hexagon Head Screw — Fully Threaded — DIN 933 / ISO 4017 / GB/T 5783
M30 x 160 is listed in the confirmed supply specifications of the products shown below. Dimensions are referenced against DIN 933 / ISO 4017 / GB/T 5783; where these standards differ, both values are shown so the correct one can be confirmed before ordering. Packing quantity, stock status and mechanical property class are confirmed in the quotation. Column symbols: P = thread pitch; e = width across corners; k = head height; s = width across flats; s min = width across flats, minimum.
Hexagon Head Screw — Fully ThreadedCurrent standardVerified dimensional data
Dimensional reference
Shows dimensions already stored in the standard library. Missing values are not filled automatically.
| standardStandard | statusStatus | PPitch · mm | aMaxaMax (mm) | cMincMin (mm) | cMaxcMax (mm) | daMaxdaMax (mm) | bearingDiameterMinbearingDiameterMin (mm) | eAcross corners · mm | kHead height · mm | kMinkMin (mm) | headHeightMaxheadHeightMax (mm) | kPrimeMinkPrimeMin (mm) | rMinrMin (mm) | sAcross flats · mm | sMins min (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIN 933 | Historical | 3.5 | 10.5 | 0.2 | 0.8 | 33.4 | 42.7 | 50.85 | 18.7 | 18.28 | 19.12 | 12.8 | 1 | 46 | 45 |
| ISO 4017 | Current | 3.5 | - | - | - | - | - | 50.85 | 18.7 | - | - | - | - | 46 | - |
| GB/T 5783 | Current | 3.5 | - | - | - | - | - | 50.85 | 18.7 | - | - | - | - | 46 | - |
| ISO 4018 | Current | 3.5 | - | - | - | - | - | 50.85 | 18.7 | - | - | - | - | 46 | - |
standardISO 4017
statusCurrent
P · mm3.5
aMax-
More dimensions
cMin-
cMax-
daMax-
bearingDiameterMin-
e · mm50.85
k · mm18.7
kMin-
headHeightMax-
kPrimeMin-
rMin-
s · mm46
sMin-
standardGB/T 5783
statusCurrent
P · mm3.5
aMax-
More dimensions
cMin-
cMax-
daMax-
bearingDiameterMin-
e · mm50.85
k · mm18.7
kMin-
headHeightMax-
kPrimeMin-
rMin-
s · mm46
sMin-
standardISO 4018
statusCurrent
P · mm3.5
aMax-
More dimensions
cMin-
cMax-
daMax-
bearingDiameterMin-
e · mm50.85
k · mm18.7
kMin-
headHeightMax-
kPrimeMin-
rMin-
s · mm46
sMin-
Quote against the correct standard.
Include sizes, material, finish, quantity and required documents.